Pumps

i.Radial Piston Pumps-
Rugged low-cost pumps with all parts renewable by replacement. Oil immersed type, open execution, face mounting, valve controlled, fixed delivery, bi-directional rotation of shaft. For coupling the pumps to the electric motors standard bell housing assemblies are available. available with two pumping elements.

ii. Pumping Elements-
Pumping Element Assembly for 1R / 2R. Oil immersed type, open execution, face mounting, valve controlled, fixed delivery.

iii. Booster Pumps

iv. Axial Piston Pump

---

PRESSURE CONTROLS

i.Direct Operated Pressure Relief Valve.

ii. Direct Operated Pressure Control Valve-
Hydraulically cushioned valves, used to control sequencing, relieving, unloading or counter-balancing operations.

iii. Direct Operated Pressure Reducing Valve.

iv. Pilot Operated Pressure Relief Valves (Cartridge Type).

v. Pilot Operated Pressure Reducing Valves (Cartridge Type).

vi. Pressure Control Modules-
Designed to control double pumps of a Hi-Low system. Unloads low pressure pump when system pressure rises above the pressure set on unloader valve. Relieves high pressure pump when system pressure reaches the value.

vii. Counter-balance Valve-
Counter balance valves are seat type valves. They offer free-flow from their port B to A and give leak free closure in opposite direction upto a predetermined pressure. This predetermined cracking pressure can be adjusted within its maximum specified range.

viii. Pressure Gauge Isolators.

---

CHECK VALVES

i. Shuttle Valves-
Seat type construction. Automatically connects it's P port to either A or B depending upon whichever of the two ports is at higher pressure level. Isolates port A and B from each other. Port P gets connected to tank, only if, port A and port B are connected to tank. Available both in Threaded and Subplate type.

ii. Check Valve-
These seat type valves allow free flow from port A to port B and give leak-proof closure in opposite direction. Available as inline mounting or Subplate mounting as per factory & ISO standards.

iii. Prefill Valve- Intended for prefilling and exhausting of large hydraulic cylinders. Can be used as anticavitation check valves. Decompression feature is optional up to size 80.

---

LOGIC CARTRIDGES

i.Cartridge Valves-
These modular valves are available with the pilot operated check valve facility on either A or B or both A and B ports. The hydraulic opening operation for free flow in reverse direction is achieved by means of internal pilot pressure available from the other working port.

ii. Two Port Slip-
In Cartridges ISO 7368- Seat type construction. Automatically connects its P port to either A or B depending upon whichever of the two ports is at higher pressure level. Isolates port A and B from each other. Port P gets connected to tank, only if, port A and port B are connected to tank. Available both in Threaded and Subplate type.

iii. Cartridge covers-
Cover with built in shuttle valve for fitting Directional spool valve

---

MANIFOLD'S TAILOR MADE

Designed specially for multistation directional control valves, CETOP- 4.2 - A - 05(P). Number of stations vary from minimum 2 to maximum 7.